-
Jaguar Performance Parts
Jaguar Land Rover Autotech Tuning uprated performance upper supercharger pulley for 5.0 V8 supercharged
£300.00 Add to basket -
Jaguar Performance Parts
Jaguar Land Rover Gearbox Tuning 8 Speed ZF 8HP
£780.00 Add to basketGearbox X8HP Tuning Jaguar Land Rover
Faster shift Speed/Time
Torque limiters Raised keeping factory Max Torque limiters in place.
Matched Torque to engine Torque request.
Get the best out of your engine performance with our brand-new gearbox ECU upgrade.
Jaguar and Land Rover 8 Speed automatic vehicles compatible with Tuning.
We offer Bespoke gearbox tuning for all Performance Levels
-
Jaguar Performance Parts
Jaguar Land Rover V6 V8 Uprated Performance Supercharger Pulley kit includes upper / Lower Crank pulleys with Belt Kit
£1,104.00 Add to basket -
Motorsports Parts
Jaguar Land Rover Y Pipe Cooling System Upgrade Kit
£198.00 Add to basketEnhance your cars reliability with the our Y Pipe Cooling System Upgrade kit for Jaguar and Land Rover – our precision-engineered pipe kit.
Designed for 5.0L V8 and 3.0L V6 Supercharged Jaguar and Land Rover engines.
This is your first line of defence against common factory Water failure / leaking and lose of engine coolent.
-
Jaguar Performance Parts
Jaguar Land Rover Y Pipe Cooling System Upgrade Kit Fitted at our work shop
£798.00 Add to basketFitted by Autotech Tuning at our Work Shop see more listings for Pipe Kit only no fitting.
Enhance your cars reliability with the our Y Pipe Cooling System Upgrade kit for Jaguar and Land Rover – our precision-engineered pipe kit.
Designed for 5.0L V8 and 3.0L V6 Supercharged Jaguar and Land Rover engines.
This is your first line of defence against common factory Water failure / leaking and lose of engine coolent.
-
Amps
JBL CLUB A5055 – 5 Channel Car Amplifier 50W RMS x 4 + 500W RMS x 1
£443.99 Add to basketSolid performance
Not into the hassle of wiring up multiple amplifiers? JBL’s Club A5055 five-channel amplifier deliver 50 watts RMS to each of your front and rear speakers, plus up to 500 watts RMS to your sub, all from a chassis that’s the size of a book. Or, you could use the amp in 3-channel mode to power a pair of high-performance speakers with 140 watts RMS each as well as 500 watts to the sub. The Class D design ensures the amp’s high output won’t put too much strain your vehicle’s electrical system.Compatible with almost any system
Speaker-level inputs and signal-sensing turn-on allow this amplifier to simply integrate into almost any system, even one using the factory radio. Separate high- and low-pass filters on the front and rear channels tune the sound to perfectly fit your speakers. The subwoofer channel features a low-pass filter, bass boost, and phase switch to tune the bass for your subwoofer. A wired remote lets you control the sub level from the front seat.Product Features:
- 5-channel car amplifier
- 50 watts RMS x 4 + 320 watts RMS x 1 at 4 ohms
- 65 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms
- 140 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms
- front and rear channels:
- Class AB amp technology
- variable high- and low-pass filters (32-320 Hz, 12 dB/octave)
- subwoofer channel:
- Class D amp technology
- variable low-pass filter (32-320 Hz, 12 dB/octave)
- variable bass boost (0-12 dB at 45 Hz)
- phase switch (0, 180 degrees)
- wired remote bass control module included
-
Subwoofers
JL Audio 10TW1-4 – 10″ Shallow Mount Subwoofer 300 Watts
£455.99 Add to basketBuilt on JL Audio’s patented thin-line subwoofer technology, the 10TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures (0.35 cu.ft. / 10 liters).
This, combined with a special cast alloy frame design, makes the 10TW1 capable of operating in extremely tight spaces.
These include under-seat installations in trucks, 2-seat sports cars and many other creative applications requiring a compact, low profile subwoofer design.
JL Audio’s patented thin-line woofer technology compresses the architecture of the 10TW1 using a “concentric tube” structure built into the injection-molded cone body.
This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs.
-
Subwoofers
JL Audio 10W0v3-4 – 10″ Subwoofer 300W
£203.99 Add to basketWith beefy 2.0 or 2.5-inch voice coils and our patented Elevated Frame Cooling, they’re certainly capable of handling power.
They also offer best-in-class excursion capability, with motors refined using our exclusive DMA modeling system for increased output and better sound quality.
In simple terms, when the going gets loud, the W0v2’s are built to perform like no other woofers in their price class.
-
Speakers
JL Audio C1-650X – C1 6.5″ (165 mm) 2-Way Coaxial Speaker 225W
£127.19 Add to basketC1 woofer drivers benefit from proprietary FEA modeling and JL Audio’s expertise in low-frequency driver design.
-
Speakers
JL Audio C2-650x – 16.5cm 6.5″ 2-Way Coaxial Speakers
£263.99 Add to basketFor a car speaker to excel it must be thoroughly engineered in all areas. The woofer design must deliver sufficient efficiency, smooth mid-range response and good low-frequency extension. The tweeter must be smooth off-axis, exhibit good extension and be non-fatiguing, while the crossover design must seamlessly blend the sound of the drivers so that the end result is clean, realistic audio performance.
In designing the new C2 Coaxial and Component Systems, we have drawn from our vast experience in woofer design as well as the tweeter technologies employed in our world-class C5 component systems. The resulting products deliver a compelling performance solution at a price within reach of any enthusiast seeking a great listening experience.
-
Tuning Tools
Kess V3 Slave Tool OBD2 and Boot Bench CAR / LCV With 5 Free credits For EU Market only
£3,902.40 Add to basketKESSv3 Slave Car/LCV OBD2 and Boot active
OBD, Bench and Boot Programming.
Thanks to thirty years of experience and nearly three years of development, KESS3 is the most advanced engineering achievement ever conceived in the Chiptuning industry.
Alientech has made a significant breakthrough to create something unique and extraordinary, which has no equal in the market, in terms of functions, convenience, and versatility.
KESS3 has been developed to provide everyone, from the young engine enthusiast to the most specialized mechatronic technicians with a quick and simple interface to any engine control unit and automatic gearbox on the market.
Sensational performance, high operational flexibility and ease of use allow you to interface with engines and gearbox control units with a single tool.
KESS3 combines 3 operating modes in one tool. OBD, Bench and Boot mode.
- OBD – With the OBD mode, you can easily access all the ECU data through the diagnostic socket.
- BENCH – A simple interface to the connector and you have complete access to the data of your ECU.
- BOOT – This mode allows you to access all system data areas. Read, Write and Clone.
- You will recieve 5 free file credits to your acount to the value of £450 .
- This tool only comes with OBD2 and Boot Car/LCV only for more protacols active please look at our listings for the one that works for you.
Shopping Basket