-
AN Quick Release Fittings
AN6 90 Degree Quick release Reusable Swivel Teflon Hose Fitting
£30.00 Add to basket -
AN Quick Release Fittings
AN6 Straight Quick release reusable Swivel hose fitting (Used With Rubber Hose) With ORB 6 Adapter set
£30.00 Add to basket -
AN Quick Release Fittings
AN6 Straight Teflon Quick Release Reusable Swivel Hose Fitting
£30.00 Add to basket -
AN Quick Release Fittings
AN8 90 Degree Quick release reusable Swivel hose fitting (Used With Rubber Hose) With ORB 8 Adapter set
£39.60 Add to basket -
AN Quick Release Fittings
AN8 Straight Quick release reusable Swivel hose fitting (Used With Rubber Hose) With ORB 8 Adapter set
£30.00 Add to basket -
Amps
AudioControl ACR-1 Remote – Wired Remote for Processor or Amplifiers
£71.99 Add to basketAdd remote level control for your AudioControl processor or amplifier.
This is the replacement remote for the Epicenter.
Comes with a 20 foot cable and removable mounting enclosure (for custom dash installations).
-
Amps
AudioControl lC1i 2 Channel Line Out Converter & Line Driver
£123.59 Add to basketThe LC1i joins ranks with AudioControl’s most popular active line output converter, the LC2i.
Adding a sub? Planning a full system? Either way, get the best possible signal from your factory sound system to your amplifiers.
Load selection switches mean OEM integration has never been easier and the LC1 will work with the most finicky factory sound systems.
Installer friendly turn on trigger modes allow for flexibility via GTO™ Signal Sense (DC offset), audio sense, or remote 12 volt inputs. For future head unit upgrades, the LC1i is also a line driver and can remain in the system to provide optimal preamp signal.
Features
- Two channels of active speaker level inputs (up to 40V input handling)
- Two channels of line level inputs
- Load Selection Switch
- GTOTM Signal Sensing
- Ground Isolation Switch
- Compact design
-
Amps
AudioControl LC6i – 6 Channel Line Output Convertor
£239.99 Add to basketFeatures
- High Current 12-Volt Trigger Output
- Internal Channel Summing
- GTO™ Signal Sensing Inputs
- Speaker Level Inputs – Can Accept 400 Watt Signals!
- Level Matching Controls
- Six Input and Output Channels
- AutoMode™ Turns 4-channel Input into 6-channel Output
- Input for Optional Subwoofer Level Control
-
Amps
Audison AP5.9 bit – 5 Channel DSP Car Amplifier 520W Max Power
£779.99 Add to basketSPECIFICATION
- MAX POWER 520 W
- OUTPUT POWER (RMS) @ 12.0 – 14.4 VDC, 1% THD:
- • 5 Ch @ 4 Ohms: 20 W x 2 + 50 W x 2 + 150 W x 1
- • 5 Ch @ 2 Ohms: 40 W x 2 + 90 W x 2 + 270 W x 1
- OUTPUT POWER (RMS) @ 14.4 VDC, 10% THD:
- • 5 Ch @ 4 Ohms : 25 W x 2 + 60 W x 2 + 190 W x 1
- • 5 Ch @ 2 Ohms: 50 W x 2 + 115 W x 2 + 350 W x 1
- Distortion – THD @ 1 kHz, 4 Ohms, 90% Power (Ch 1-2-3-4): 0.08 %
- Distortion – THD @ 1 kHz, 4 Ohms, 90% Power (Ch 5): 0.1 %
- Bandwidth (-3 dB, 2 V RMS, 4 Ohms): 10Hz – 20kHz / 10Hz – 500Hz SUB
- Input sensitivity: 2 – 15 V RMS
- Max size (mm/in.): 198 x 45.50 x 134 / 7.8 x 1.8 x 5.27
- Weight (kg/lb): 1.5 / 3.3
-
Speakers
Audison AP6.5 Woofer – 165mm 6.5″ Woofer 210W
£135.59 Add to basketSpecifications:
- Woofer
- 165mm 6.5″ Woofer
- 70W Countinuous Power
- 210W Peak Power
- 4 Ohm
- Frequency Reponse 60-5K Hz
- Sensitivity 93.5dB/Spl
- High Density Flux Ferrite
- Water-Repellend Pressed Paper
-
Manufacturer Specific Kits
Audison APBMW K4E – 4″ 2-Way Compent Speakers For BMW & Mini
£335.99 Add to basketSpecifications:
- Woofer Size mm (in.): 100 (4)
- Tweeter Size mm (in.): 29 (1.1)
- Power Handling: 100W peak, 50W continuous
- Impedance: 4 Ohms
- Frequency Response Hz: 90 – 23k
- Sensitivity dB: 89
- Crossover Type: Hi-Pass – 6 KHz @ 6dB/Oct.
- Component adjustment dB: -3, 0
- Woofer Magnet size D x d x h mm (in.):
- 50 x 29 x 3 (1.97 x 1.14 x 0.12)
- Tweeter Magnet size D x d x h mm (in.):
- 24.5 x 4 (0.96 x 0.16)
- Weight of one speaker Kg (lb): Woofer 0.426 (0.94)
- Tweeter 0.06 (0.13)
- Voice Coil Ø: Woofer 25 (1) Tweeter 25 (1)
Shopping Basket