-
Manufacturer Specific Kits
Isuzu D MAX Front Rear Door Speaker Fitting Kit Hertz UNO K165 – 16.5cm 2-Way Component Speakers 300W & fitting kit / with sound deadining MAT
£252.00 Add to basketSpecifications
- Power Handling – Peak W 300
- Power Handling – Continuous W 75
- Impedance Ω 4
- Frequency response Hz 55 ÷ 23k
- Sensitivity dB SPL 93,5
- Voice coil Ø mm (in.) 25 (1)
- Woofer size mm (in.) 165 (6.5)
- Tweeter size mm (in.) 24 (0.9)
- Woofer magnet High density flux ferrite
- Tweeter magnet Neodymium
- Woofer cone Water-repellent pressed paper
- Tweeter dome PEI
- Crossover type 6 dB/Oct tweeter integrated
-
Amps
JBL CLUB A5055 – 5 Channel Car Amplifier 50W RMS x 4 + 500W RMS x 1
£443.99 Add to basketSolid performance
Not into the hassle of wiring up multiple amplifiers? JBL’s Club A5055 five-channel amplifier deliver 50 watts RMS to each of your front and rear speakers, plus up to 500 watts RMS to your sub, all from a chassis that’s the size of a book. Or, you could use the amp in 3-channel mode to power a pair of high-performance speakers with 140 watts RMS each as well as 500 watts to the sub. The Class D design ensures the amp’s high output won’t put too much strain your vehicle’s electrical system.Compatible with almost any system
Speaker-level inputs and signal-sensing turn-on allow this amplifier to simply integrate into almost any system, even one using the factory radio. Separate high- and low-pass filters on the front and rear channels tune the sound to perfectly fit your speakers. The subwoofer channel features a low-pass filter, bass boost, and phase switch to tune the bass for your subwoofer. A wired remote lets you control the sub level from the front seat.Product Features:
- 5-channel car amplifier
- 50 watts RMS x 4 + 320 watts RMS x 1 at 4 ohms
- 65 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms
- 140 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms
- front and rear channels:
- Class AB amp technology
- variable high- and low-pass filters (32-320 Hz, 12 dB/octave)
- subwoofer channel:
- Class D amp technology
- variable low-pass filter (32-320 Hz, 12 dB/octave)
- variable bass boost (0-12 dB at 45 Hz)
- phase switch (0, 180 degrees)
- wired remote bass control module included
-
Subwoofers
JL Audio 10TW1-4 – 10″ Shallow Mount Subwoofer 300 Watts
£455.99 Add to basketBuilt on JL Audio’s patented thin-line subwoofer technology, the 10TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures (0.35 cu.ft. / 10 liters).
This, combined with a special cast alloy frame design, makes the 10TW1 capable of operating in extremely tight spaces.
These include under-seat installations in trucks, 2-seat sports cars and many other creative applications requiring a compact, low profile subwoofer design.
JL Audio’s patented thin-line woofer technology compresses the architecture of the 10TW1 using a “concentric tube” structure built into the injection-molded cone body.
This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs.
-
Subwoofers
JL Audio 10W0v3-4 – 10″ Subwoofer 300W
£203.99 Add to basketWith beefy 2.0 or 2.5-inch voice coils and our patented Elevated Frame Cooling, they’re certainly capable of handling power.
They also offer best-in-class excursion capability, with motors refined using our exclusive DMA modeling system for increased output and better sound quality.
In simple terms, when the going gets loud, the W0v2’s are built to perform like no other woofers in their price class.
-
Speakers
JL Audio C1-650X – C1 6.5″ (165 mm) 2-Way Coaxial Speaker 225W
£127.19 Add to basketC1 woofer drivers benefit from proprietary FEA modeling and JL Audio’s expertise in low-frequency driver design.
-
Speakers
JL Audio C2-650x – 16.5cm 6.5″ 2-Way Coaxial Speakers
£263.99 Add to basketFor a car speaker to excel it must be thoroughly engineered in all areas. The woofer design must deliver sufficient efficiency, smooth mid-range response and good low-frequency extension. The tweeter must be smooth off-axis, exhibit good extension and be non-fatiguing, while the crossover design must seamlessly blend the sound of the drivers so that the end result is clean, realistic audio performance.
In designing the new C2 Coaxial and Component Systems, we have drawn from our vast experience in woofer design as well as the tweeter technologies employed in our world-class C5 component systems. The resulting products deliver a compelling performance solution at a price within reach of any enthusiast seeking a great listening experience.
-
Subwoofers
MPS 250 S4 – 10″ Single 4 Ohm Car Subwoofer 1000W
£478.80 Add to basketHertz MPS 250 S2 shallow subwoofer has been designed to achieve exceptional performance even when there is very little space available to install the subwoofer box.
MPS 250 is optimized to work in ultra-compact sealed boxesstarting from only 14 Lt (0.49 Cf). A typical example is a subwoofer enclosure under the rear bench of pickup trucks, where the space – and the height – are limited.
Mille PRO shallow subwoofer have a depth/performance ratio never achieved before thanks to the impressive cone excursion capacity which is 20% higher than a traditional design.
This exceptional target has been achieved thanks to the ingenious suspension group design featuring a dedicated support structure for spider and coil. This solution has allowed to move the magnetic group inwards, reducing the depth and at the same time maximizing cone linear excursion.
-
Subwoofers
MPS 300 S4 300 – 12″ Single 4 Ohm Car Subwoofer 1000W
£546.00 Add to basketMPS 300 S4 shallow subwoofer has been designed to achieve exceptional performance even when there is very little space available to install the subwoofer box.
MPS 300 S4 is optimized to work in ultra-compact sealed boxesstarting from only 22,7 Lt (0.8 Cf). A typical example is a subwoofer enclosure under the rear bench of pickup trucks, where the space – and the height – are limited.
MPS 300 S4 has a depth/performance ratio never achieved before thanks to the impressive cone excursion capacity which is 20% higher than a traditional design.
This exceptional target has been achieved thanks to the ingenious suspension group design featuring a dedicated support structure for the spider and coil. This solution has allowed the movement of the magnetic group inwards, reducing the depth and at the same time maximizing cone linear excursion.
-
Component Speakers
Phonocar 4927 – Rain Stop Moisture Guard
£9.59 Add to basketPhonocar Rain Stop helps prolong the life of your speakers and prevents water and moisture damage.
Rain Stop is the perfect moisture guard for your speaker upgrades.
X2 Sheets.
-
Amps
Powerbass AWS-16SP 16 Gauge Speaker Wire 1 Metre
£3.47 Add to basketFEATURES
- 500’ 16 Gauge Speaker Wire
- 1 Metre
- 60 Strands x 2
- 50% OFC/50% CCA Blended Wire
- Flexible Blue Satin PVC Insulation Jacket
-
Component Speakers
SilentCoat Sound Absorber 35 – 2 Sheets Polyurethane Foam Material
£59.99 Add to basketSound Absorber 35 – 2 Sheets Polyurethane Foam Material
Shopping Basket