Amps

  • Amps

    Hertz HP802 – 1/2 Channel AB Class Car Audio Amplifier 1800W

    £1,092.00 Add to basket

    HP 802 is an AB Class stereo spl car audio amplifier, able to deliver up to 1800W. The power supply stage is overbuilt featuring components selected for their robustness, efficiency and reliability even for extended time operation. The output stage features an oversized power supply with 4 toroidal transformers, providing the ability to deliver remarkable power and work stable into 1 Ohm load.
    The array of the featured filters is remarkably complex, beyond the standards of mobile electronics in this category: separate Hi-Pass and Lo-Pass filters, able to be configured into a 50 Hz – 10 Hz adjustable Band-Pass filter. A parametric equalizer is also on board, to optimize the response on amplified channels, as well as a Pre Out, to re-launch the input signal to another HP 802 in a multi-amplified system without limits on the number of ways.

  • Amps

    Hertz ML Power 5 – D-Class 5 Channel Car Amplifier 950 WRMS Total Power

    £763.19 Add to basket

    Mille power amplifiers are born to fully enhance the outstanding performance of the Mille speakers. The new ADC (ADVANCED D-CLASS TECHNOLOGY) ensures pure listening pleasure while keeping a compact size with unmatched power efficiency. The heat sink, engineered with double technology, extrusion and aluminium die-casting, enables the Mille Power amplifiers to work constantly at full power without ever overheating, further maximizing thermal efficiency. The ultra-versatile Hertzaudio car amplifier ML Power 5 (100 W x 4 550 W 2 Ω) provides the ability to drive a Mille system including the subwoofer. The HRC BM (Hertz Remote Control Bass Management), low frequencies level remote control, is optional.

  • Amps

    JBL CLUB A5055 – 5 Channel Car Amplifier 50W RMS x 4 + 500W RMS x 1

    £443.99 Add to basket

    Solid performance
    Not into the hassle of wiring up multiple amplifiers? JBL’s Club A5055 five-channel amplifier deliver 50 watts RMS to each of your front and rear speakers, plus up to 500 watts RMS to your sub, all from a chassis that’s the size of a book. Or, you could use the amp in 3-channel mode to power a pair of high-performance speakers with 140 watts RMS each as well as 500 watts to the sub. The Class D design ensures the amp’s high output won’t put too much strain your vehicle’s electrical system.

    Compatible with almost any system
    Speaker-level inputs and signal-sensing turn-on allow this amplifier to simply integrate into almost any system, even one using the factory radio. Separate high- and low-pass filters on the front and rear channels tune the sound to perfectly fit your speakers. The subwoofer channel features a low-pass filter, bass boost, and phase switch to tune the bass for your subwoofer. A wired remote lets you control the sub level from the front seat.

     

    Product Features:

    • 5-channel car amplifier
    • 50 watts RMS x 4 + 320 watts RMS x 1 at 4 ohms
    • 65 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms
    • 140 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms
    •  front and rear channels:
    • Class AB amp technology
    • variable high- and low-pass filters (32-320 Hz, 12 dB/octave)
    • subwoofer channel:
    • Class D amp technology
    • variable low-pass filter (32-320 Hz, 12 dB/octave)
    • variable bass boost (0-12 dB at 45 Hz)
    • phase switch (0, 180 degrees)
    • wired remote bass control module included
  • Amps

    Powerbass AWS-16SP 16 Gauge Speaker Wire 1 Metre

    £3.47 Add to basket

    FEATURES

    • 500’ 16 Gauge Speaker Wire
    • 1 Metre
    • 60 Strands x 2
    • 50% OFC/50% CCA Blended Wire
    • Flexible Blue Satin PVC Insulation Jacket
  • Amps

    Skinz Sound Damping Material- Shop Pack 7 Sheets

    £43.19 Add to basket
    Stop fighting engine rumble, speaker rattle, road noise and buzzing vehicle parts!
    Apply SKINZ Sound Deadning to your vehicle’s resonant surfaces and enjoy improved clarity, loudness and bass response from your car stereo.
  • Amps

    Stinger Select SSK0 – 1/0 Gauge 1500W Complete Amplifer Wiring Kit

    £82.68 Add to basket

    Featuring Ultra Flexible CCA cable construction for excellent current transfer to power hungry amplifiers on a budget. Quality twisted pair interconnects for noise free signal transfer. Also includes , remote turn-on ANL high current fuse holder and ring terminals for a complete installation package.

    Kit Contents:

    • 17FT Matte Blue Ultra Flexible Power Wire (CCA)
    • 3FT Matte Gray Ultra Flexible Ground Wire (CCA)
    • 17FT Twisted Pair RCA Interconnects (OFC)
    • 17FT Blue Remote Turn-on Wire (CCA)
    • 1pc. High Current ANL Fuseholder with 150A fuse
  • Amps

    Stinger Select SSK4ANL – 4 Gauge 1000W Complete AMP Wiring Kit

    £47.99 Add to basket

    Stinger Select’s fuse holders feature quality construction for better system performance and efficiency. The satin finish rejects corrosion and enhances conductivity. Large setscrews make connections tight and reliable for system longevity. Pair with SS ANL fuses for reliable system protection.

    • ANL Fuseholder 1/0GA or 4GA Inputs
    • Satin Silver Finish
Shopping Basket

Manufacturer

Models

CategOries

Scroll to Top