-
Amps
Audison AP5.9 bit – 5 Channel DSP Car Amplifier 520W Max Power
£779.99 Add to basketSPECIFICATION
- MAX POWER 520 W
- OUTPUT POWER (RMS) @ 12.0 – 14.4 VDC, 1% THD:
- • 5 Ch @ 4 Ohms: 20 W x 2 + 50 W x 2 + 150 W x 1
- • 5 Ch @ 2 Ohms: 40 W x 2 + 90 W x 2 + 270 W x 1
- OUTPUT POWER (RMS) @ 14.4 VDC, 10% THD:
- • 5 Ch @ 4 Ohms : 25 W x 2 + 60 W x 2 + 190 W x 1
- • 5 Ch @ 2 Ohms: 50 W x 2 + 115 W x 2 + 350 W x 1
- Distortion – THD @ 1 kHz, 4 Ohms, 90% Power (Ch 1-2-3-4): 0.08 %
- Distortion – THD @ 1 kHz, 4 Ohms, 90% Power (Ch 5): 0.1 %
- Bandwidth (-3 dB, 2 V RMS, 4 Ohms): 10Hz – 20kHz / 10Hz – 500Hz SUB
- Input sensitivity: 2 – 15 V RMS
- Max size (mm/in.): 198 x 45.50 x 134 / 7.8 x 1.8 x 5.27
- Weight (kg/lb): 1.5 / 3.3
-
Amps
Audison Prima AP4 D – 4 Channel Amplifier Bridgeable Amp
£383.99 Add to basketThe AP4 D amplifier was designed as an extension for the AP 4.9 bit and AP 5.9 bit amplifiers, offering 4 additional 70 W amplified channels.
-
Amps
Audison SR 1.500 – Mono Car Compact High Powered Amplifier 1000W
£539.99 Add to basketPOWER OUTPUT
- @ 4 Ohm – 310 W Mono
- @ 2 Ohm – 540 W Mono
- ADC (Audison D-Class) Technology 2Ω stable output stage ensuring high audio performance in a compact size.
- Extruded aluminum compact design with fan less convection cooling system.
- Built-in USS (Universal Speakers Simulator).
- Balanced high-noise rejection input speaker-In (for OEM head units) and RCA-In (for Aftermarket head units) inputs.
- ART (Automatic Remote Turn-On/Off) automatically turns on/off the amplifier when the OEM head-unit turns on/off (can be enabled/ disabled, with Speaker-In inputs).
- Pre-outs, also available when using Speaker-In level inputs.
- 5 ch/3 ch operation mode (selectable), to create a five-channel system (with sub), or a powerful sub + front three-channel system.
- Bass Boost (50 Hz) adjustable to 12 dB, to increase the subwoofer punch.
- Lo-Pass and Hi-Pass 12 dB adjustable (50 Hz to 3200 Hz) filters, providing the ability to build a front + rear system, a multichannel woofer + tweeter system or a powerful sub + front system.
- 24 dB continuous adjustable (50 to 500 Hz) Lo-Pass subwoofer filter.
- SUBSONIC filter (24 dB – 25 Hz), removes very low subsonic frequencies from music signal to avoid damages to the subwoofer.
- Optional VCR-S1 Remote Volume Control providing the ability to adjust subwoofer volume level from the dashboard.
WHAT’S IN THE BOX
- SR1.500 Amplifier
- Remote IN/OUT Cable
- Speaker IN Cable
- 2.5mm Hex Key
- 2mm Hex Key
- x4 – 2 x 55mm Screws
- x2 – Fuse 35A
- User’s Manual & Warranty
-
Subwoofers
Hertz Cento CS 250 S4 – 10″ Single 4 Ohm Subwoofer 600W
£203.99 Add to basketPowerful low bass form a compact enclosure is surely the holy grail for anyone looking to build a complete system on a budget.
This 10″ beauty has been designed to operate in a sealed enclosure of just 16 Litres.
Capable of handling fast transients up to 600 Watts, the Cento CS 250 S4 is yet another example of how Hertz is rapidly rewriting the rules of car hifi.
-
Amps
Hertz DPower 1 – Mono D Class Car Amplifier 600W
£239.99 Add to basketGeneral Specs
- Channel 1
- Power supply voltage / fuse: 11 ÷ 15 VDC / 1 x 20 A
- Idling current (power ON/OFF) 1 A / 0.04 mA
- Consumption @ 2Ω, 14.4 VDC
- (Max Musical Power): 20 A
- Remote In: 4 ÷ 15 VDC – 1 mA
- ART™: Automatic Remote Turn-On/Off
- Distortion – THD (100 Hz @ 4Ω): 0.1 %
- Bandwidth (-3 dB): 10 ÷ 500 Hz
- S/N Ratio (A weighted @ 1 V) 105 dB
- Damping factor (100 Hz @ 4Ω) 100
- Pre-In sensitivity: LO: 0.2 ÷ 5 V
- HI: 0.8 ÷ 20 V
- Load impedance (MIN) 2Ω
- Max size (mm/inches): 222,2 x 160 x 50,5 / 8.75 x 6.3 x 1.99
- Weight (kg/lb): 1.61 / 3.54
- Adjustable Crossovers yes
Output Power
- Output Power (RMS) @ 14.4 VDC, THD 1%:
- 150 W x 1 (4Ω)
- 250 W x 1 (2Ω)
- Output Power (RMS) @ 14.4 VDC, THD 10%:
- 180 W x 1 (4Ω)
- 300 W x 1 (2Ω)
- Total Power RMS 300 W
INPUTS / FILTERS
- Inputs: PRE IN / SPEAKER IN
- Pre out FULL range
- Filters FULL:
- Lo-Pass: 50 ÷ 220 Hz @ 12 dB/Oct
- BOOST 45 Hz: 0 ÷ 12 dB
- Remote Volume Control: (optional) (-20 ÷ 6) dB
-
Subwoofers
Hertz Energy ES 200.5 – 8″ Subwoofer 600W
£151.19 Add to basketThe Hertz Energy.5 subwoofers offer a dynamic bass and are capable of outstanding SPL never achieved in this category of the market.
The introduction of the V-cone technology had a big impact in the efficiency of the ES.5 subwoofers, also improving cone stiffness and reducing the weight of the moving assembly, allowing a higher strength voice coil for a higher peak power handling.
-
Component Speakers
Hertz MILLE MPK 165.3 PRO – 16.5cm 6.5″ Component Speakers 220W
£383.99 Add to basketThe MPK 165.3 car audio speakers system has been designed to ensure a wide low frequency response, even in cars with no space for a subwoofer.
-
Speakers
Hertz MILLE MPX-165.3 PRO – 6.5″ 16.5cm 2-Way Coaxial Speaker 200W
£275.99 Add to basketThe coax tweeter concentric to the woofer of the MPX 165 car audio coaxial speakers allows for one single linear-phase emission point, for a natural timbre providing a detailed sound stage. Thanks to the “Center Tuning Duct” geometry, the tweeter resonance frequency is especially low and the employment of damping materials for the inside provides for a linear acoustic emission. The acoustic lens optimizes its off-axis response, which is typical with door installation of coax speakers; besides, the 36 mm diameter woofer generates deep and controlled bass frequencies.
-
Subwoofers
JL Audio 10TW1-4 – 10″ Shallow Mount Subwoofer 300 Watts
£455.99 Add to basketBuilt on JL Audio’s patented thin-line subwoofer technology, the 10TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures (0.35 cu.ft. / 10 liters).
This, combined with a special cast alloy frame design, makes the 10TW1 capable of operating in extremely tight spaces.
These include under-seat installations in trucks, 2-seat sports cars and many other creative applications requiring a compact, low profile subwoofer design.
JL Audio’s patented thin-line woofer technology compresses the architecture of the 10TW1 using a “concentric tube” structure built into the injection-molded cone body.
This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs.
-
Subwoofers
JL Audio 10W0v3-4 – 10″ Subwoofer 300W
£203.99 Add to basketWith beefy 2.0 or 2.5-inch voice coils and our patented Elevated Frame Cooling, they’re certainly capable of handling power.
They also offer best-in-class excursion capability, with motors refined using our exclusive DMA modeling system for increased output and better sound quality.
In simple terms, when the going gets loud, the W0v2’s are built to perform like no other woofers in their price class.
-
Amps
Stinger Select SSK0 – 1/0 Gauge 1500W Complete Amplifer Wiring Kit
£82.68 Add to basketFeaturing Ultra Flexible CCA cable construction for excellent current transfer to power hungry amplifiers on a budget. Quality twisted pair interconnects for noise free signal transfer. Also includes , remote turn-on ANL high current fuse holder and ring terminals for a complete installation package.
Kit Contents:
- 17FT Matte Blue Ultra Flexible Power Wire (CCA)
- 3FT Matte Gray Ultra Flexible Ground Wire (CCA)
- 17FT Twisted Pair RCA Interconnects (OFC)
- 17FT Blue Remote Turn-on Wire (CCA)
- 1pc. High Current ANL Fuseholder with 150A fuse
Shopping Basket