#ampwiringkits

  • AudioControl ACR-1 Remote - Wired Remote for Processor or Amplifiers Add to basket
    Amps

    AudioControl ACR-1 Remote – Wired Remote for Processor or Amplifiers

     £71.99 Add to basket

    Add remote level control for your AudioControl processor or amplifier.

    This is the replacement remote for the Epicenter.

    Comes with a 20 foot cable and removable mounting enclosure (for custom dash installations).

  • AudioControl LC6i - 6 Channel Line Output Convertor Add to basket
    Amps

    AudioControl LC6i – 6 Channel Line Output Convertor

     £239.99 Add to basket

    Features

    • High Current 12-Volt Trigger Output
    • Internal Channel Summing
    • GTO™ Signal Sensing Inputs
    • Speaker Level Inputs – Can Accept 400 Watt Signals!
    • Level Matching Controls
    • Six Input and Output Channels
    • AutoMode™ Turns 4-channel Input into 6-channel Output
    • Input for Optional Subwoofer Level Control
  • Audison AP5.9 bit - 5 Channel DSP Car Amplifier 520W Max Power Add to basket
    Amps

    Audison AP5.9 bit – 5 Channel DSP Car Amplifier 520W Max Power

     £779.99 Add to basket

    SPECIFICATION

    • MAX POWER 520 W
    • OUTPUT POWER (RMS) @ 12.0 – 14.4 VDC, 1% THD:
    • • 5 Ch @ 4 Ohms: 20 W x 2 + 50 W x 2 + 150 W x 1
    • • 5 Ch @ 2 Ohms: 40 W x 2 + 90 W x 2 + 270 W x 1
    • OUTPUT POWER (RMS) @ 14.4 VDC, 10% THD:
    • • 5 Ch @ 4 Ohms : 25 W x 2 + 60 W x 2 + 190 W x 1
    • • 5 Ch @ 2 Ohms: 50 W x 2 + 115 W x 2 + 350 W x 1
    • Distortion – THD @ 1 kHz, 4 Ohms, 90% Power (Ch 1-2-3-4): 0.08 %
    • Distortion – THD @ 1 kHz, 4 Ohms, 90% Power (Ch 5): 0.1 %
    • Bandwidth (-3 dB, 2 V RMS, 4 Ohms): 10Hz – 20kHz / 10Hz – 500Hz SUB
    • Input sensitivity: 2 – 15 V RMS
    • Max size (mm/in.): 198 x 45.50 x 134 / 7.8 x 1.8 x 5.27
    • Weight (kg/lb): 1.5 / 3.3
  • Audison AP6.5 Woofer - 165mm 6.5" Woofer 210W Add to basket
    Speakers

    Audison AP6.5 Woofer – 165mm 6.5″ Woofer 210W

     £135.59 Add to basket

    Specifications:

    • Woofer
    • 165mm 6.5″ Woofer
    • 70W Countinuous Power
    • 210W Peak Power
    • 4 Ohm
    • Frequency Reponse 60-5K Hz
    • Sensitivity 93.5dB/Spl
    • High Density Flux Ferrite
    • Water-Repellend Pressed Paper
  • Audison APX6.5 - 16.5cm 6.5" 2-Way Coaxial Speaker 210W Add to basket
    Speakers

    Audison APX6.5 – 16.5cm 6.5″ 2-Way Coaxial Speaker 210W

     £155.99 Add to basket

    APX 6.5 features a concentric coaxial tweeter: with one single point of sound emission it’s possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter.
    The 6.5″ cones surround featuring the exclusive shallow “Triple Wave” profile, for maximum excursion linearity.

  • Audison SR 1.500 - Mono Car Compact High Powered Amplifier 1000W Add to basket
    Amps

    Audison SR 1.500 – Mono Car Compact High Powered Amplifier 1000W

     £539.99 Add to basket

    POWER OUTPUT

    • @ 4 Ohm – 310 W Mono
    • @ 2 Ohm – 540 W Mono
    • ADC (Audison D-Class) Technology 2Ω stable output stage ensuring high audio performance in a compact size.
    • Extruded aluminum compact design with fan less convection cooling system.
    • Built-in USS (Universal Speakers Simulator).
    • Balanced high-noise rejection input speaker-In (for OEM head units) and RCA-In (for Aftermarket head units) inputs.
    • ART (Automatic Remote Turn-On/Off) automatically turns on/off the amplifier when the OEM head-unit turns on/off (can be enabled/ disabled, with Speaker-In inputs).
    • Pre-outs, also available when using Speaker-In level inputs.
    • 5 ch/3 ch operation mode (selectable), to create a five-channel system (with sub), or a powerful sub + front three-channel system.
    • Bass Boost (50 Hz) adjustable to 12 dB, to increase the subwoofer punch.
    • Lo-Pass and Hi-Pass 12 dB adjustable (50 Hz to 3200 Hz) filters, providing the ability to build a front + rear system, a multichannel woofer + tweeter system or a powerful sub + front system.
    • 24 dB continuous adjustable (50 to 500 Hz) Lo-Pass subwoofer filter.
    • SUBSONIC filter (24 dB – 25 Hz), removes very low subsonic frequencies from music signal to avoid damages to the subwoofer.
    • Optional VCR-S1 Remote Volume Control providing the ability to adjust subwoofer volume level from the dashboard.

    WHAT’S IN THE BOX

    • SR1.500 Amplifier
    • Remote IN/OUT Cable
    • Speaker IN Cable
    • 2.5mm Hex Key
    • 2mm Hex Key
    • x4 – 2 x 55mm Screws
    • x2 – Fuse 35A
    • User’s Manual & Warranty
  • Audison SR 4.300 - 4 Channel Car Compact High Powered Amplifier 500W Add to basket
    Amps

    Audison SR 4.300 – 4 Channel Car Compact High Powered Amplifier 500W

     £419.99 Add to basket

    HIGH POWER IN A COMPACT SIZE

    We are proud to present the renovated SR 4.300 (85 W x 4 @ 4Ω) introduced back in 1988 and constantly updated with the best technologies available.

    Audison_ADT

    The Audison design team, headquartered in the Potenza Picena (Italy), spent a long time planning and perfecting the new SR line, taking full advantage of the features that the most recent amplification devices available today are equipped with. After numerous listening tests in a double-blind configuration on a significant sample of professionals and enthusiasts, the R&D team decided to adopt a new D-class technology called ADT (Audison D-Class Technology) for the whole range, which made it possible to reduce the size of the amplifiers considerably, totally preserving the audio performance that characterize each Audison project.

    EDGELESS DESIGN

    As for the electronics design, the Audison style center has taken care of every aesthetic and functional detail, obtaining a compact amplifier made of extruded aluminium with rounded corners that ease the installation of the product in narrow spaces. Thanks to the generous heat sinks on the two short sides of the amplifiers, internal cooling fans are not necessary, which are often cause of noise and dust accumulation.

    COMPLETE CONTROLS ON UPPER PANEL

    As per tradition, the SR amplifiers confirm their vocation for versatility by including on all models a complete filter section, suitable for any type of audio system configuration. The controls, protected by a satin-finish aluminium panel, are located on the amplifier upper panel, to be easily reached from above even after the product has been installed. When the system includes an Audison bit processor, the filter section can be totally excluded.

    Audison_USS

    Thanks to the integration of Audison USS technology (Universal Speakers Simulator) in the high-level inputs, the SR amplifiers can also be appropriately connected to OEM sources featuring the “speaker load detection” function that monitor the presence of a low-impedance load to enable audio outputs.

    LIMITLESS CONNECTIVITY

    All models are equipped with high-level balanced inputs for connection to the OEM Head Unit speakers output and low RCA level for the after-market ones. When the high level input is used, the ART function (Automatic Remote Turn-On / Off) can be enabled to control the switching on of the amplifiers with the head unit switch-on button.

    In addition, there is a remote IN / OUT socket to allow the control of multiple cascaded amplifiers switch on when required.

    The SR 1.500, SR 4.300 and 4.500 models recreate the PRE-OUT signal by using the Speaker-IN input to interface it with OEM sources only equipped with amplified outputs, allowing the system expansion.

  • Audison SR 4.500 - 4 Channel Amplifier with Crossover 130 WRMS x 4 Add to basket
    Amps

    Audison SR 4.500 – 4 Channel Amplifier with Crossover 130 WRMS x 4

     £551.99 Add to basket

    SPECIFICATION

    • OUTPUT POWER (RMS) @14.4 VDC, 1% THD: 125 W x 4 Ch
    • SN ratio (ref. 1 W output) 83 dBA
    • OUTPUT POWER (RMS) @14.4 VDC, 1% THD:  POWER W RMS
    • 4 CH – 130 x 4 (4Ω)
    • 4 CH – 1 20 x 4 (2Ω)
    • 3 CH – 120 x 2 (4Ω) + 480 W x 1 (4Ω)
    • 3 CH – 220 x 2 (2Ω) + 440 x 1 (4Ω)
    • 2 CH – 450 x 2 (4Ω)
  • Hertz Cento CK165L - 6.5" 2-Way Car Comnponent Door Speakers 600W Max Add to basket
    Component Speakers

    Hertz Cento CK165L – 6.5″ 2-Way Car Comnponent Door Speakers 600W Max

     £247.19 Add to basket

    The Cento line expands with the C165 L woofer, featuring the use of non-pressed paper for the cone membrane, a choice that gives this component a natural sound, with solid and controlled low frequencies.

    The enhancement of the magnetic group together with the specific wide stroke voice coil allow the excursion of the woofer to be maximized maintaining utmost control even in the most demanding musical passages.

    The CK 165 L system consists of the C 165 L woofer, the C26 tweeter and the crossovers dedicated to the CCX 2W woofer and CCX 2T tweeter, made with selected components. The ultra-compact dimensions of the crossovers and the wire connections provide the specialist with a broader freedom during the installation.

    The tweeter filter is 12 dB/oct. with two levels of attenuation while for the woofer, thanks to its regular frequency roll-off, a 6 dB/oct. made with a pure copper high diameter coil is used to the advantage of reduced electrical losses and therefore of low frequencies efficiency. The engaging low frequencies and impressive power handling make the CK 165 L the perfect system for fans looking for strong emotions in the car cabin.

  • Hertz Cento CPX 165 Pro - 16.5cm 2-Way Coaxial Speakers Door Speakers Add to basket
    Speakers

    Hertz Cento CPX 165 Pro – 16.5cm 2-Way Coaxial Speakers Door Speakers

     £239.87 Add to basket

    Hertz Cento speakers are designed for those who are looking for a powerful yet airy sound.

    Featuring many of the design strategies of the Hertz Mille Pro range at a fraction of the cost.
    In particular the all important cooling vents on the base plate ensure that voice coils are kept temperature stable – Essential for a linear performance.

    The centrally-mounted tetelon dome tweeter utilises these cooling vents as a back chamber reducing the resonant frequency and assisting with a smooth frequency transition from high-mid frequencies.

    The pressed paper cone and large butyl surround featured on the woofer help deliver punch and low end power. Hertz Cento delivers excellent performance at this price level.

  • Hertz DPower 1 - Mono D Class Car Amplifier 600W Add to basket
    Amps

    Hertz DPower 1 – Mono D Class Car Amplifier 600W

     £239.99 Add to basket

    General Specs

    • Channel 1
    • Power supply voltage / fuse:  11 ÷ 15 VDC / 1 x 20 A
    • Idling current (power ON/OFF) 1 A / 0.04 mA
    • Consumption @ 2Ω, 14.4 VDC
    • (Max Musical Power): 20 A
    • Remote In: 4 ÷ 15 VDC – 1 mA
    • ART™:  Automatic Remote Turn-On/Off
    • Distortion – THD (100 Hz @ 4Ω): 0.1 %
    • Bandwidth (-3 dB): 10 ÷ 500 Hz
    • S/N Ratio (A weighted @ 1 V) 105 dB
    • Damping factor (100 Hz @ 4Ω) 100
    • Pre-In sensitivity: LO: 0.2 ÷ 5 V
    • HI: 0.8 ÷ 20 V
    • Load impedance (MIN) 2Ω
    • Max size (mm/inches): 222,2 x 160 x 50,5 / 8.75 x 6.3 x 1.99
    • Weight (kg/lb): 1.61 / 3.54
    • Adjustable Crossovers yes

    Output Power

    • Output Power (RMS) @ 14.4 VDC, THD 1%:
    • 150 W x 1 (4Ω)
    • 250 W x 1 (2Ω)
    • Output Power (RMS) @ 14.4 VDC, THD 10%:
    • 180 W x 1 (4Ω)
    • 300 W x 1 (2Ω)
    • Total Power RMS 300 W

    INPUTS / FILTERS

    • Inputs: PRE IN / SPEAKER IN
    • Pre out FULL range
    • Filters FULL:
    • Lo-Pass: 50 ÷ 220 Hz @ 12 dB/Oct
    • BOOST 45 Hz:  0 ÷ 12 dB
    • Remote Volume Control: (optional) (-20 ÷ 6) dB
  • Hertz HCP2 - 2/1 Channel Bridgeable Car Amplifier 400W Add to basket
    Amps

    Hertz HCP2 – 2/1 Channel Bridgeable Car Amplifier 400W

     £259.19 Add to basket

    Hertz HCP2 – 400W Stereo Amplifier HCP 2 is a stereo, 400W amplifier, designed to expand or modify with maximum easiness the factory system: featuring pre-amplified (Pre-In) inputs as well as high-level (Speaker-In) inputs, for connection with any head units.
    All the Hertz Compact Power amplifiers are assembled with high-quality components and feature a complete and by-passable crossover system. The dissipation system is optimized with the heat being transferred to the heat sink and then dissipated through the sides of the amplifier.
    With HCP 2 high power systems can be realized: settable both in mono, to drive the subwoofer, and together with another amplifier, for more complex systems; it also features a Bass Boost filters (0 ÷ 12 dB) to enhance low frequencies.

    1. Compact design built from an extruded aluminum heatsink with the top side ensuring effective transfer of the heat generated by the power electronic components.
    2. Special balanced input circuitry to reject electromagnetic disturbances present on the Pre-amplified or Speaker level inputs.
    3. Input featuring both Speaker-In (OEM radio) and RCA-In (Aftermarket radio) inputs.
    4. Selectable ART™, Automatic Remote Turn-On/Off function, automatically turns on and off the amplifier when the OEM radio turns on and off (available on Speaker-In only).
    5. Power supply stage featuring multiple winding transformer, Low-ESR 105°C capacitors, AB-Class 2 Ω stable.
    6. Pre-out, also available when using Speaker level inputs.
    7. Mono operation mode (selectable) to drive a subwoofer or, in combination with a second amplifier, for a powerful dual-mono system.
    8. Bass Boost (50 Hz) selectable to 12 dB, to increase the subwoofer punch.
    9. Lo-Pass (50 Hz to 500 Hz) and Hi-Pass (80 Hz) 12 dB crossover filters.
    The Hi-Pass fixed frequency filter ensures optimal coupling with sub amplifier.
    10. Selectable full range power outputs.

Shopping Basket

Manufacturer

Models

CategOries

Scroll to Top