-
Component Speakers
Audison APK130 – 13cm 5.25″ Prima Component Speakers
£253.19 Add to basketTwo way system features AP 1 tweeter and AP 5 Woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, 0dB for an A-pillar installation without additional grilles between the tweeter and the listener.
To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection. -
Amps
Audison Prima AP4 D – 4 Channel Amplifier Bridgeable Amp
£383.99 Add to basketThe AP4 D amplifier was designed as an extension for the AP 4.9 bit and AP 5.9 bit amplifiers, offering 4 additional 70 W amplified channels.
-
Amps
Audison SR 1.500 – Mono Car Compact High Powered Amplifier 1000W
£539.99 Add to basketPOWER OUTPUT
- @ 4 Ohm – 310 W Mono
- @ 2 Ohm – 540 W Mono
- ADC (Audison D-Class) Technology 2Ω stable output stage ensuring high audio performance in a compact size.
- Extruded aluminum compact design with fan less convection cooling system.
- Built-in USS (Universal Speakers Simulator).
- Balanced high-noise rejection input speaker-In (for OEM head units) and RCA-In (for Aftermarket head units) inputs.
- ART (Automatic Remote Turn-On/Off) automatically turns on/off the amplifier when the OEM head-unit turns on/off (can be enabled/ disabled, with Speaker-In inputs).
- Pre-outs, also available when using Speaker-In level inputs.
- 5 ch/3 ch operation mode (selectable), to create a five-channel system (with sub), or a powerful sub + front three-channel system.
- Bass Boost (50 Hz) adjustable to 12 dB, to increase the subwoofer punch.
- Lo-Pass and Hi-Pass 12 dB adjustable (50 Hz to 3200 Hz) filters, providing the ability to build a front + rear system, a multichannel woofer + tweeter system or a powerful sub + front system.
- 24 dB continuous adjustable (50 to 500 Hz) Lo-Pass subwoofer filter.
- SUBSONIC filter (24 dB – 25 Hz), removes very low subsonic frequencies from music signal to avoid damages to the subwoofer.
- Optional VCR-S1 Remote Volume Control providing the ability to adjust subwoofer volume level from the dashboard.
WHAT’S IN THE BOX
- SR1.500 Amplifier
- Remote IN/OUT Cable
- Speaker IN Cable
- 2.5mm Hex Key
- 2mm Hex Key
- x4 – 2 x 55mm Screws
- x2 – Fuse 35A
- User’s Manual & Warranty
-
Amps
Audison SR 4.500 – 4 Channel Amplifier with Crossover 130 WRMS x 4
£551.99 Add to basketSPECIFICATION
- OUTPUT POWER (RMS) @14.4 VDC, 1% THD: 125 W x 4 Ch
- SN ratio (ref. 1 W output) 83 dBA
- OUTPUT POWER (RMS) @14.4 VDC, 1% THD: POWER W RMS
- 4 CH – 130 x 4 (4Ω)
- 4 CH – 1 20 x 4 (2Ω)
- 3 CH – 120 x 2 (4Ω) + 480 W x 1 (4Ω)
- 3 CH – 220 x 2 (2Ω) + 440 x 1 (4Ω)
- 2 CH – 450 x 2 (4Ω)
-
Component Speakers
Hertz ESK130.5 – 2 Way 13cm 5.25″ Component Speakers
£203.99 Add to basketEnergy systems are the ideal solution to install a very good quality system in factory locations.
Given with complete mounting hardware, these systems synthesize and fully represent Energy line sound philosophy.
Listening to pure energy.
-
Amps
Hertz HCP2 – 2/1 Channel Bridgeable Car Amplifier 400W
£259.19 Add to basketHertz HCP2 – 400W Stereo Amplifier HCP 2 is a stereo, 400W amplifier, designed to expand or modify with maximum easiness the factory system: featuring pre-amplified (Pre-In) inputs as well as high-level (Speaker-In) inputs, for connection with any head units.
All the Hertz Compact Power amplifiers are assembled with high-quality components and feature a complete and by-passable crossover system. The dissipation system is optimized with the heat being transferred to the heat sink and then dissipated through the sides of the amplifier.
With HCP 2 high power systems can be realized: settable both in mono, to drive the subwoofer, and together with another amplifier, for more complex systems; it also features a Bass Boost filters (0 ÷ 12 dB) to enhance low frequencies.1. Compact design built from an extruded aluminum heatsink with the top side ensuring effective transfer of the heat generated by the power electronic components.
2. Special balanced input circuitry to reject electromagnetic disturbances present on the Pre-amplified or Speaker level inputs.
3. Input featuring both Speaker-In (OEM radio) and RCA-In (Aftermarket radio) inputs.
4. Selectable ART™, Automatic Remote Turn-On/Off function, automatically turns on and off the amplifier when the OEM radio turns on and off (available on Speaker-In only).
5. Power supply stage featuring multiple winding transformer, Low-ESR 105°C capacitors, AB-Class 2 Ω stable.
6. Pre-out, also available when using Speaker level inputs.
7. Mono operation mode (selectable) to drive a subwoofer or, in combination with a second amplifier, for a powerful dual-mono system.
8. Bass Boost (50 Hz) selectable to 12 dB, to increase the subwoofer punch.
9. Lo-Pass (50 Hz to 500 Hz) and Hi-Pass (80 Hz) 12 dB crossover filters.
The Hi-Pass fixed frequency filter ensures optimal coupling with sub amplifier.
10. Selectable full range power outputs. -
Amps
Hertz HCP4 – 4-3-2 Channel Bridgeable Car Amplifier 760W
£307.19 Add to basketHertz HCP4 – 760W Stereo Amplifier HCP 4 is an amplifier designed to reproduce any musical genres with four separate channels for multiple configurations. Pre-amplified (Pre-In) inputs and high-level (Speaker-In) inputs allow for connection with any head units. Built to work both in mono, as part of a three-channel system with sub and front, and in stereo for a powerful two-channel system, HCP 4 is a unique model in terms of versatility!
All the Hertz Compact Power amplifiers are assembled with high-quality components and feature a complete and by-passable crossover system. The dissipation system is optimized with the heat being transferred to the heat sink and then dissipated through the sides of the amplifier.- Compact design built from an extruded aluminum heatsink with the top side ensuring effective transfer of the heat generated by the power electronic components.
- Special balanced input circuitry to reject electromagnetic disturbances present on the Pre-amplified or Speaker level inputs.
- Input featuring both Speaker-In (OEM radio) and RCA-In (Aftermarket radio) inputs.
- Selectable ART™, Automatic Remote Turn-On/Off function, automatically turns on and off the amplifier when the OEM radio turns on and off (available on Speaker-In only).
- Power supply stage featuring multiple winding transformer, Low-ESR 105°C capacitors, AB-Class 2 Ω stable.
- Pre-out, also available when using Speaker level inputs.
- Mono operation mode (selectable) to realize a sub + front three-channel system, or a powerful two-channel system.
- Bass Boost (50 Hz) selectable to 12 dB, to increase the subwoofer punch.
- Lo-Pass (50 Hz to 500 Hz) and Hi-Pass (80 Hz) 12 dB crossover filters. The Hi-Pass fixed frequency filter ensures optimal coupling with sub amplifier, also providing the ability
- realize a front + rear or a sub + front system.
- Selectable full range power outputs.
-
Speakers
Hertz MILLE MPX-165.3 PRO – 6.5″ 16.5cm 2-Way Coaxial Speaker 200W
£275.99 Add to basketThe coax tweeter concentric to the woofer of the MPX 165 car audio coaxial speakers allows for one single linear-phase emission point, for a natural timbre providing a detailed sound stage. Thanks to the “Center Tuning Duct” geometry, the tweeter resonance frequency is especially low and the employment of damping materials for the inside provides for a linear acoustic emission. The acoustic lens optimizes its off-axis response, which is typical with door installation of coax speakers; besides, the 36 mm diameter woofer generates deep and controlled bass frequencies.
-
Subwoofers
JL Audio 10W0v3-4 – 10″ Subwoofer 300W
£203.99 Add to basketWith beefy 2.0 or 2.5-inch voice coils and our patented Elevated Frame Cooling, they’re certainly capable of handling power.
They also offer best-in-class excursion capability, with motors refined using our exclusive DMA modeling system for increased output and better sound quality.
In simple terms, when the going gets loud, the W0v2’s are built to perform like no other woofers in their price class.
-
Speakers
JL Audio C1-650X – C1 6.5″ (165 mm) 2-Way Coaxial Speaker 225W
£127.19 Add to basketC1 woofer drivers benefit from proprietary FEA modeling and JL Audio’s expertise in low-frequency driver design.
-
Speakers
JL Audio C2-650x – 16.5cm 6.5″ 2-Way Coaxial Speakers
£263.99 Add to basketFor a car speaker to excel it must be thoroughly engineered in all areas. The woofer design must deliver sufficient efficiency, smooth mid-range response and good low-frequency extension. The tweeter must be smooth off-axis, exhibit good extension and be non-fatiguing, while the crossover design must seamlessly blend the sound of the drivers so that the end result is clean, realistic audio performance.
In designing the new C2 Coaxial and Component Systems, we have drawn from our vast experience in woofer design as well as the tweeter technologies employed in our world-class C5 component systems. The resulting products deliver a compelling performance solution at a price within reach of any enthusiast seeking a great listening experience.
Shopping Basket