-
Component Speakers
Hertz MILLE MPK 165.3 PRO – 16.5cm 6.5″ Component Speakers 220W
£383.99 Add to basketThe MPK 165.3 car audio speakers system has been designed to ensure a wide low frequency response, even in cars with no space for a subwoofer.
-
Component Speakers
Hertz MILLE MPK 165P.3 PRO – 16.5cm 6.5″ Component Car Speakers
£431.99 Add to basketSpecifications:
- Power Handling
- Peak W 230 – Continuous W 115
- Impedance 3Ohms
- Frequency response Hz 45 – 22.5k
- Sensitivity dB SPL 93
- Voice coil Ø mm (in.) 25 (1)
- Woofer size mm (in.) 165 (6.5)
- Tweeter size mm (in.) 29 (1.14)
- Woofer magnet High density flux ferrite
- Tweeter magnet Neodymium
- Woofer cone Pressed-pulp cone with cotton fibres
- Tweeter dome Tetolon
- Crossover type 2-Way Passive
- Crossover Crossover cut off 4 kHz
-
Speakers
Hertz MILLE MPX-165.3 PRO – 6.5″ 16.5cm 2-Way Coaxial Speaker 200W
£275.99 Add to basketThe coax tweeter concentric to the woofer of the MPX 165 car audio coaxial speakers allows for one single linear-phase emission point, for a natural timbre providing a detailed sound stage. Thanks to the “Center Tuning Duct” geometry, the tweeter resonance frequency is especially low and the employment of damping materials for the inside provides for a linear acoustic emission. The acoustic lens optimizes its off-axis response, which is typical with door installation of coax speakers; besides, the 36 mm diameter woofer generates deep and controlled bass frequencies.
-
Speakers
Hertz Mille Pro MP 165P.3 – 6.5″ Mid Range Woofer 200W
£222.00 Add to basketThe MP 165P.3 car audio woofers electro-acoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The voice coil with a generous 14 mm height, has a nominal 3 Ω impedance in addition to an increased power handling. These features provide the ability to maximally exploit the power of the Hertz HCP and HDP amplifiers as well as all the 2 Ω stable electronics. The ferrite 95 mm diameter magnet enables a +/-4.5 mm voice coil linear excursion, ensuring utmost control at all times. The Boundary Free Surround moves a bigger amount of air, and the V-cone® profile improves the offaxis dispersion, the real in-car listening condition. The sophisticated aluminium alloy basket neutralizes the undesired vibrations.
-
Component Speakers
Hertz Mille Pro MPK 1650.3 – 2-Way Component Speakers 250W
£492.00 Add to basketThe Mille Pro line of speakers from Hertz goes from strength to strength with many customers praising the price/performance ration of this affordable range. The MPK 1650 combines the flexibility of a woofer with 3 Ohm impedance and high efficiency with a brand new 28mm tweeter containing many of the technical attributes of the bigger brother Mille Legend tweeter. These include a lower resonant frequency and large, damped rear chamber allowing for lower crossover points leading to a smooth, lustrous sound. Fair to say, this component set matches previously unachievable sound quality at this price.
-
Amps
Hertz ML Power 5 – D-Class 5 Channel Car Amplifier 950 WRMS Total Power
£763.19 Add to basketMille power amplifiers are born to fully enhance the outstanding performance of the Mille speakers. The new ADC (ADVANCED D-CLASS TECHNOLOGY) ensures pure listening pleasure while keeping a compact size with unmatched power efficiency. The heat sink, engineered with double technology, extrusion and aluminium die-casting, enables the Mille Power amplifiers to work constantly at full power without ever overheating, further maximizing thermal efficiency. The ultra-versatile Hertzaudio car amplifier ML Power 5 (100 W x 4 550 W 2 Ω) provides the ability to drive a Mille system including the subwoofer. The HRC BM (Hertz Remote Control Bass Management), low frequencies level remote control, is optional.
-
Speakers
Hertz MP 25.3 Pro – Tweeters
£146.40 Add to basket1. Tetolon fibre soft dome, for a natural yet detailed reproduction of musical nuances.
2. “Centre Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion.
3. High density flux Neodymium magnet, optimised for utmost control during high energy dynamic transients in the mid-high frequency range.
4. 25mm ferrofluid-cooled mobile voice coil.
5. Rear chamber filled with selected damping material and sized for lower Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.
6. Faceplate featuring FEM (Finite Element Modelling) optimised geometry, for high linearity in off-axis installations.
7. Wide array of installation accessories, for easy OEM integration -
Speakers
Hertz MP 25.3 Pro – Tweeters
£143.99 Add to basket1. Tetolon fibre soft dome, for a natural yet detailed reproduction of musical nuances.
2. “Centre Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion.
3. High density flux Neodymium magnet, optimised for utmost control during high energy dynamic transients in the mid-high frequency range.
4. 25mm ferrofluid-cooled mobile voice coil.
5. Rear chamber filled with selected damping material and sized for lower Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.
6. Faceplate featuring FEM (Finite Element Modelling) optimised geometry, for high linearity in off-axis installations.
7. Wide array of installation accessories, for easy OEM integration -
Subwoofers
HERTZ MPBX 250 S2 250 (10) mm (in.) | 1000 W | 2 Ohm
£624.00 Add to basketMPBX 250 S2 ultra-shallow sealed enclosure is specifically optimized to deliver all the MPS 250 S2 subwoofer performances. The enclosure structure features incomparable robustness thanks to 15 mm (0.59 in.) wood thickness. Internal sound-absorbing material virtually increases the box’s volume and reduces acoustic resonances. Panel-to-panel internal bracing with solid corners minimizes resonances and round corners ease the placement. 2S² (2 Sides/2 Sounds) design provides the ability to choose between Down-Firing mounting, through supplied feet with Hook-and-loop inserts, to increase the low-frequency extension, and Up-Firing installation to obtain more punch and definition. SSP (Sub Smart Plug) features both Plug-&-Play terminal block and traditional push terminals providing bulletproof connection and quick release.
-
Component Speakers
Hertz UNO K165 – 16.5cm 2-Way Component Speakers 300W
£113.99 Add to basketSpecifications
- Power Handling – Peak W 300
- Power Handling – Continuous W 75
- Impedance Ω 4
- Frequency response Hz 55 ÷ 23k
- Sensitivity dB SPL 93,5
- Voice coil Ø mm (in.) 25 (1)
- Woofer size mm (in.) 165 (6.5)
- Tweeter size mm (in.) 24 (0.9)
- Woofer magnet High density flux ferrite
- Tweeter magnet Neodymium
- Woofer cone Water-repellent pressed paper
- Tweeter dome PEI
- Crossover type 6 dB/Oct tweeter integrated
-
Component Speakers
Hertz UNO K165 – 16.5cm 2-Way Component Speakers 300W
£113.99 Add to basketThe K 165 Uno system features a 24 mm (0.9ˈ) diaphragm Neodymium tweeter with PEI dome, for a brilliant reproduction of high frequencies in a compact size.
The annular acoustic lens is optimized for exceptional off-axis performance, ensuring an accurate stereo image.
The 6.5” woofers features a pressed-paper cone with foam surround, for high SPL and solid bass.
The 25 mm(1ˈ) woofer voice coil driven by a high-flux density ferrite magnet offers a highly dynamic power handling for a powerful undistorted sound.
The 6dB/Oct crossover is integrated on the tweeter wiring for an easy OEM upgrade.












