-
Amps
AudioControl LC6i – 6 Channel Line Output Convertor
£239.99 Add to basketFeatures
- High Current 12-Volt Trigger Output
- Internal Channel Summing
- GTO™ Signal Sensing Inputs
- Speaker Level Inputs – Can Accept 400 Watt Signals!
- Level Matching Controls
- Six Input and Output Channels
- AutoMode™ Turns 4-channel Input into 6-channel Output
- Input for Optional Subwoofer Level Control
-
Amps
Audison AP5.9 bit – 5 Channel DSP Car Amplifier 520W Max Power
£779.99 Add to basketSPECIFICATION
- MAX POWER 520 W
- OUTPUT POWER (RMS) @ 12.0 – 14.4 VDC, 1% THD:
- • 5 Ch @ 4 Ohms: 20 W x 2 + 50 W x 2 + 150 W x 1
- • 5 Ch @ 2 Ohms: 40 W x 2 + 90 W x 2 + 270 W x 1
- OUTPUT POWER (RMS) @ 14.4 VDC, 10% THD:
- • 5 Ch @ 4 Ohms : 25 W x 2 + 60 W x 2 + 190 W x 1
- • 5 Ch @ 2 Ohms: 50 W x 2 + 115 W x 2 + 350 W x 1
- Distortion – THD @ 1 kHz, 4 Ohms, 90% Power (Ch 1-2-3-4): 0.08 %
- Distortion – THD @ 1 kHz, 4 Ohms, 90% Power (Ch 5): 0.1 %
- Bandwidth (-3 dB, 2 V RMS, 4 Ohms): 10Hz – 20kHz / 10Hz – 500Hz SUB
- Input sensitivity: 2 – 15 V RMS
- Max size (mm/in.): 198 x 45.50 x 134 / 7.8 x 1.8 x 5.27
- Weight (kg/lb): 1.5 / 3.3
-
Speakers
Audison AP6.5 Woofer – 165mm 6.5″ Woofer 210W
£135.59 Add to basketSpecifications:
- Woofer
- 165mm 6.5″ Woofer
- 70W Countinuous Power
- 210W Peak Power
- 4 Ohm
- Frequency Reponse 60-5K Hz
- Sensitivity 93.5dB/Spl
- High Density Flux Ferrite
- Water-Repellend Pressed Paper
-
Component Speakers
Audison APK165 – 16.5cm Prima component speakers
Price range: £275.99 through £791.99 Select options This product has multiple variants. The options may be chosen on the product pageTwo way system features AP 1 tweeter and AP 6.5 Woofer.
APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, 0dB for an A-pillar installation without additional grilles between the tweeter and the listener.
-
Speakers
Audison APX6.5 – 16.5cm 6.5″ 2-Way Coaxial Speaker 210W
£155.99 Add to basketAPX 6.5 features a concentric coaxial tweeter: with one single point of sound emission it’s possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter.
The 6.5″ cones surround featuring the exclusive shallow “Triple Wave” profile, for maximum excursion linearity. -
Amps
Audison Prima AP4 D – 4 Channel Amplifier Bridgeable Amp
£383.99 Add to basketThe AP4 D amplifier was designed as an extension for the AP 4.9 bit and AP 5.9 bit amplifiers, offering 4 additional 70 W amplified channels.
-
Amps
Audison SR 1.500 – Mono Car Compact High Powered Amplifier 1000W
£539.99 Add to basketPOWER OUTPUT
- @ 4 Ohm – 310 W Mono
- @ 2 Ohm – 540 W Mono
- ADC (Audison D-Class) Technology 2Ω stable output stage ensuring high audio performance in a compact size.
- Extruded aluminum compact design with fan less convection cooling system.
- Built-in USS (Universal Speakers Simulator).
- Balanced high-noise rejection input speaker-In (for OEM head units) and RCA-In (for Aftermarket head units) inputs.
- ART (Automatic Remote Turn-On/Off) automatically turns on/off the amplifier when the OEM head-unit turns on/off (can be enabled/ disabled, with Speaker-In inputs).
- Pre-outs, also available when using Speaker-In level inputs.
- 5 ch/3 ch operation mode (selectable), to create a five-channel system (with sub), or a powerful sub + front three-channel system.
- Bass Boost (50 Hz) adjustable to 12 dB, to increase the subwoofer punch.
- Lo-Pass and Hi-Pass 12 dB adjustable (50 Hz to 3200 Hz) filters, providing the ability to build a front + rear system, a multichannel woofer + tweeter system or a powerful sub + front system.
- 24 dB continuous adjustable (50 to 500 Hz) Lo-Pass subwoofer filter.
- SUBSONIC filter (24 dB – 25 Hz), removes very low subsonic frequencies from music signal to avoid damages to the subwoofer.
- Optional VCR-S1 Remote Volume Control providing the ability to adjust subwoofer volume level from the dashboard.
WHAT’S IN THE BOX
- SR1.500 Amplifier
- Remote IN/OUT Cable
- Speaker IN Cable
- 2.5mm Hex Key
- 2mm Hex Key
- x4 – 2 x 55mm Screws
- x2 – Fuse 35A
- User’s Manual & Warranty
-
Amps
Audison SR 4.500 – 4 Channel Amplifier with Crossover 130 WRMS x 4
£551.99 Add to basketSPECIFICATION
- OUTPUT POWER (RMS) @14.4 VDC, 1% THD: 125 W x 4 Ch
- SN ratio (ref. 1 W output) 83 dBA
- OUTPUT POWER (RMS) @14.4 VDC, 1% THD: POWER W RMS
- 4 CH – 130 x 4 (4Ω)
- 4 CH – 1 20 x 4 (2Ω)
- 3 CH – 120 x 2 (4Ω) + 480 W x 1 (4Ω)
- 3 CH – 220 x 2 (2Ω) + 440 x 1 (4Ω)
- 2 CH – 450 x 2 (4Ω)
-
Component Speakers
Citroen, Peugeot, Toyota,Vauxhall,Nissan Front Rear Door Speaker Fitting Kit Hertz UNO K165 – 16.5cm 2-Way Component Speakers 300W
£156.00 Add to basketSpecifications
- Power Handling – Peak W 300
- Power Handling – Continuous W 75
- Impedance Ω 4
- Frequency response Hz 55 ÷ 23k
- Sensitivity dB SPL 93,5
- Voice coil Ø mm (in.) 25 (1)
- Woofer size mm (in.) 165 (6.5)
- Tweeter size mm (in.) 24 (0.9)
- Woofer magnet High density flux ferrite
- Tweeter magnet Neodymium
- Woofer cone Water-repellent pressed paper
- Tweeter dome PEI
- Crossover type 6 dB/Oct tweeter integrated
-
Component Speakers
Citroen, Peugeot, Toyota,Vauxhall,Nissan Front Rear Door Speaker Fitting Kit Hertz UNO K165 – 16.5cm 2-Way Component Speakers 300W Kit
£288.00 Add to basketSpecifications
- Power Handling – Peak W 300
- Power Handling – Continuous W 75
- Impedance Ω 4
- Frequency response Hz 55 ÷ 23k
- Sensitivity dB SPL 93,5
- Voice coil Ø mm (in.) 25 (1)
- Woofer size mm (in.) 165 (6.5)
- Tweeter size mm (in.) 24 (0.9)
- Woofer magnet High density flux ferrite
- Tweeter magnet Neodymium
- Woofer cone Water-repellent pressed paper
- Tweeter dome PEI
- Crossover type 6 dB/Oct tweeter integrated
-
Component Speakers
Citroen, Peugeot, Toyota,Vauxhall,Nissan Front Rear Door Speaker Fitting Kit Pioneer TS-G170C – 17cm 6.5″ 2-Way Car Component Speakers 300W
£108.00 Add to basketDescriptionThe improved G-series speaker range is specifically developed for premium and powerful audio, with excellent value for money. Their rigid design has been optimised with multi-bolt patterns, making it very easy to install any G-series speaker in your car. Thanks to their increased power handling and high sensitivity performance, these speakers reproduce deep, impactful bass and natural highs – even at high volumes.
Shopping Basket