-
Component Speakers
Hertz UNO K165 – 16.5cm 2-Way Component Speakers 300W
£113.99 Add to basketSpecifications
- Power Handling – Peak W 300
- Power Handling – Continuous W 75
- Impedance Ω 4
- Frequency response Hz 55 ÷ 23k
- Sensitivity dB SPL 93,5
- Voice coil Ø mm (in.) 25 (1)
- Woofer size mm (in.) 165 (6.5)
- Tweeter size mm (in.) 24 (0.9)
- Woofer magnet High density flux ferrite
- Tweeter magnet Neodymium
- Woofer cone Water-repellent pressed paper
- Tweeter dome PEI
- Crossover type 6 dB/Oct tweeter integrated
-
Component Speakers
Hertz UNO K165 – 16.5cm 2-Way Component Speakers 300W
£113.99 Add to basketThe K 165 Uno system features a 24 mm (0.9ˈ) diaphragm Neodymium tweeter with PEI dome, for a brilliant reproduction of high frequencies in a compact size.
The annular acoustic lens is optimized for exceptional off-axis performance, ensuring an accurate stereo image.
The 6.5” woofers features a pressed-paper cone with foam surround, for high SPL and solid bass.
The 25 mm(1ˈ) woofer voice coil driven by a high-flux density ferrite magnet offers a highly dynamic power handling for a powerful undistorted sound.
The 6dB/Oct crossover is integrated on the tweeter wiring for an easy OEM upgrade.
-
Speakers
Hertz UNO X165 – 16.5cm 2 Ways Coaxial Speakers 220W
£83.99 Add to basketThe 6.5” two way coaxials are available X 165 features a special designed tweeter faceplate optimized for exceptional off-axis performance to ensure a linear frequency response when installed in a factory replacement setup.
The pressed-paper cone treated with water-repellent along with the foam surround provide a very high SPL and extended low frequency response, to obtain a rich sound even when driven by the OEM head unit.
The 25 mm(1ˈ) woofer voice coil driven by a high-flux density ferrite magnet offers a highly dynamic power handling for a powerful undistorted sound.
The easy-to-install DIN size basket, protected by an abrasion-resistant dust paint, makes the factory speakers replacement a snap.
-
Manufacturer Specific Kits
Isuzu D MAX Front Door Speaker Fitting Kit Hertz DCX690 – 3 Way 6×9 Coaxial Shelf Speakers & fitting kit / with sound deadining MAT
£258.00 Add to basketDCX690 three way coaxial derives from the combination of a real woofer with a 60 mm cone midrange and a Mylar dome tweeter. You get linearity, good off-axis response and tonal accuracy which you can’t normally have with standard coaxial speakers.
-
Manufacturer Specific Kits
Isuzu D MAX Front Rear Door Speaker Fitting Kit Hertz UNO K165 – 16.5cm 2-Way Component Speakers 300W & fitting kit
£222.00 Add to basketSpecifications
- Power Handling – Peak W 300
- Power Handling – Continuous W 75
- Impedance Ω 4
- Frequency response Hz 55 ÷ 23k
- Sensitivity dB SPL 93,5
- Voice coil Ø mm (in.) 25 (1)
- Woofer size mm (in.) 165 (6.5)
- Tweeter size mm (in.) 24 (0.9)
- Woofer magnet High density flux ferrite
- Tweeter magnet Neodymium
- Woofer cone Water-repellent pressed paper
- Tweeter dome PEI
- Crossover type 6 dB/Oct tweeter integrated
-
Manufacturer Specific Kits
Isuzu D MAX Front Rear Door Speaker Fitting Kit Hertz UNO K165 – 16.5cm 2-Way Component Speakers 300W & fitting kit / with sound deadining MAT
£252.00 Add to basketSpecifications
- Power Handling – Peak W 300
- Power Handling – Continuous W 75
- Impedance Ω 4
- Frequency response Hz 55 ÷ 23k
- Sensitivity dB SPL 93,5
- Voice coil Ø mm (in.) 25 (1)
- Woofer size mm (in.) 165 (6.5)
- Tweeter size mm (in.) 24 (0.9)
- Woofer magnet High density flux ferrite
- Tweeter magnet Neodymium
- Woofer cone Water-repellent pressed paper
- Tweeter dome PEI
- Crossover type 6 dB/Oct tweeter integrated
-
Amps
JBL CLUB A5055 – 5 Channel Car Amplifier 50W RMS x 4 + 500W RMS x 1
£443.99 Add to basketSolid performance
Not into the hassle of wiring up multiple amplifiers? JBL’s Club A5055 five-channel amplifier deliver 50 watts RMS to each of your front and rear speakers, plus up to 500 watts RMS to your sub, all from a chassis that’s the size of a book. Or, you could use the amp in 3-channel mode to power a pair of high-performance speakers with 140 watts RMS each as well as 500 watts to the sub. The Class D design ensures the amp’s high output won’t put too much strain your vehicle’s electrical system.Compatible with almost any system
Speaker-level inputs and signal-sensing turn-on allow this amplifier to simply integrate into almost any system, even one using the factory radio. Separate high- and low-pass filters on the front and rear channels tune the sound to perfectly fit your speakers. The subwoofer channel features a low-pass filter, bass boost, and phase switch to tune the bass for your subwoofer. A wired remote lets you control the sub level from the front seat.Product Features:
- 5-channel car amplifier
- 50 watts RMS x 4 + 320 watts RMS x 1 at 4 ohms
- 65 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms
- 140 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms
- front and rear channels:
- Class AB amp technology
- variable high- and low-pass filters (32-320 Hz, 12 dB/octave)
- subwoofer channel:
- Class D amp technology
- variable low-pass filter (32-320 Hz, 12 dB/octave)
- variable bass boost (0-12 dB at 45 Hz)
- phase switch (0, 180 degrees)
- wired remote bass control module included
-
Subwoofers
JL Audio 10W0v3-4 – 10″ Subwoofer 300W
£203.99 Add to basketWith beefy 2.0 or 2.5-inch voice coils and our patented Elevated Frame Cooling, they’re certainly capable of handling power.
They also offer best-in-class excursion capability, with motors refined using our exclusive DMA modeling system for increased output and better sound quality.
In simple terms, when the going gets loud, the W0v2’s are built to perform like no other woofers in their price class.
-
Speakers
JL Audio C2-650x – 16.5cm 6.5″ 2-Way Coaxial Speakers
£263.99 Add to basketFor a car speaker to excel it must be thoroughly engineered in all areas. The woofer design must deliver sufficient efficiency, smooth mid-range response and good low-frequency extension. The tweeter must be smooth off-axis, exhibit good extension and be non-fatiguing, while the crossover design must seamlessly blend the sound of the drivers so that the end result is clean, realistic audio performance.
In designing the new C2 Coaxial and Component Systems, we have drawn from our vast experience in woofer design as well as the tweeter technologies employed in our world-class C5 component systems. The resulting products deliver a compelling performance solution at a price within reach of any enthusiast seeking a great listening experience.
-
Amps
Skinz Sound Damping Material- Shop Pack 7 Sheets
£43.19 Add to basketStop fighting engine rumble, speaker rattle, road noise and buzzing vehicle parts!Apply SKINZ Sound Deadning to your vehicle’s resonant surfaces and enjoy improved clarity, loudness and bass response from your car stereo. -
Amps
Stinger Select SSK0 – 1/0 Gauge 1500W Complete Amplifer Wiring Kit
£82.68 Add to basketFeaturing Ultra Flexible CCA cable construction for excellent current transfer to power hungry amplifiers on a budget. Quality twisted pair interconnects for noise free signal transfer. Also includes , remote turn-on ANL high current fuse holder and ring terminals for a complete installation package.
Kit Contents:
- 17FT Matte Blue Ultra Flexible Power Wire (CCA)
- 3FT Matte Gray Ultra Flexible Ground Wire (CCA)
- 17FT Twisted Pair RCA Interconnects (OFC)
- 17FT Blue Remote Turn-on Wire (CCA)
- 1pc. High Current ANL Fuseholder with 150A fuse









